Electrically Conductive Resins
Outlined below are several electrically conductive adhesives and coatings. Epoxies,
Etc... has engineered these materials to satisfy the requirements of many demanding
coating and bonding applications that require electrical conductivity.
Key Benefits
- One and two component systems are available
- Convenient specialty packaging available, i.e. premixed
and frozen
- Highest electrical conductivity available
Go to Conversions, Measures, and Weights
| PRODUCT |
DESCRIPTION |
MIX
RATIO
R:C |
MIXED
VISCOSITY
CPS |
VOLUME
RESISTIVITY
(OHM-CM) |
TENSILE
STRENGTH
PSI |
OPERATING
TEMP. 0°C |
| 40-3900 |
Two component epoxy filled with pure silver. High
electrical conductivity with a wide operating temperature range. Easy 1:1 mix ratio. |
100:100 |
Paste |
0.0001 |
9,450 |
-50 to +170 |
| 40-3905 |
Two component silver filled epoxy. Offers high electrical
and thermal conductivity. Recommended for use in applications where hot soldering is
impractical. |
100:5 |
Paste |
0.0001 |
9,500 |
-50 to +165 |
| 40-3910 |
One
component silver filled heat curing epoxy adhesive. Outstanding bonds
are achieved to a variety of substrates. Ideal with most dispensing
methods. |
No Catalyst Required |
Paste |
0.00035 |
10,000 |
-55 to +170 |
| 40-3914 |
One
component solvent based electrically conductive ink. Used in EMI and RFI shielding. Nickel
filled |
No
Catalyst Required |
14,000 |
.008 |
4,000 |
-20 to +135 |
| 40-3916 |
Two component nickel filled epoxy adhesive. Cures at room
temperature and recommended for use where exposure to salt water causes silver based
systems to corrode. |
100:5 |
Paste |
0.02 |
9,000 |
-55 to +135 |
| 40-3920 |
One
component solvent based electrically
conductive ink.
Used in EMI and RFI shielding. Silver filled. |
No Catalyst Required |
15,000 |
0.0002 |
4,000 |
-20 to +140 |
|
IMPORTANT: The information in this table is based on
data obtained by our own research and is considered accurate. However, no warranty is
expressed or implied regarding the accuracy of these data, the results to be obtained from
the use thereof, or that any such use will not infringe any patent. This information is
furnished upon the condition that the person receiving it shall make his own tests to
determine the suitability thereof for his particular purpose.
Having trouble deciding on which of our products best meets your requirements? Then let
us assist you in selecting a product by using our online Product
Selection Form. If we do not have an existing product that meets your requirements, we
will develop one!
|
